|
Homelux have strengthened its range of seals, with the introduction of Waterproof Matting for both walls & floors. The product is a membrane installed beneath any tile application, and ensures complete watertight protection, preventing the migration of moisture from the tile surface to the substrate below.
The floor membrane provides the added benefit of a de-coupling fleece layer, which acts as a separation layer, to allow movement. Tiles can be installed onto the matting immediately as there is no waiting or drying time.
HOMELUX WATERPROOF MATTING
Waterproofing & sealing against water and moisture is perhaps the most critical element of any wet area installation and with new Homelux Waterproof Matting, you can shower with the complete confidence that your installation is absolutely watertight with a 100% guaranteed seal.
The Problem
Most of us have had some experience of the damage that can be caused when tiled bathrooms & wet areas are not sealed properly against intrusive water & moisture. Unsightly damp patches constantly re-appear on the ceiling in the room below your bathroom, not to mention the unseen damage that leaks can cause to timber frames, building joists and plasterboards etc.
Why the problem exists
Contrary to popular belief, thin set unglazed tiles are permeable and moisture will migrate through these areas and can be absorbed into the substrates behind. While water resistant grouts offer some protection, these areas still remain permeable and over time increasing levels of moisture will penetrate these joints.
Other influences, which will have an effect on the integrity of your sealing joints, will be the normal subsidence which occurs in buildings. The drying and cracking of mastics or silicones used to seal joints and the expansion and contraction of wooden or concrete floors, may cause the tiles to delaminate or move from their original position. So regardless of whether you have used traditional waterproof tile adhesives or sealants, you will not necessarily have a watertight seal around your bath or shower tray.
Why is waterproof matting the solution?
Waterproofing & sealing against water and moisture is critical in order to protect any construction or building against intruding water and related damages. Damages from such leaks can create high & escalating repair costs.
Homelux have therefore launched Waterproof Matting for both walls & floors, a one stop solution to permanent waterproofing.
The product comes on rolls of 5m x 1m or 20m x 1m & there is a full range of accessories to be used in conjunction with the matting to completely seal the tiled area.
Homelux waterproof matting offers the following benefits:
- Quick & easy to apply
- Wet room completely sealed from water & moisture penetration to substrates below
- Provides a separation layer between the floor & tiles, acting as a de-coupling fleece layer, allowing movement & helps to stop tiles from cracking
- No waiting or drying time, able to install tiles immediately once the matting is applied
- Uniform thickness of 0.85mm, with no weak points
- 10 year guarantee to a 100% waterproof seal
- Available for wall & floor to provide a complete tanking system
- Use under tile or natural stone, over any concrete or wooden floor
01335 347300
www.homelux.co.uk
Enquiry no: 404
- Ours Sanitary Ware Aquires Middlewich
- New UK Designed and Manufactured Linear Drain...
- Style, innovation and quality from Matki Show...
- MX Group – A growing influence in the bathroo...
- Replacement shower solutions from Triton
- Dural UK Ltd, Linear Shower Drainage Systems
- New generation extraction from Westin Design
- AN IDEAL WORLD
- The Hoover All in One
- PASA XP from KERMI







