|
The weber.sys protec integrated tanking system is a totally reliable wet area pre-tile system enabling tilers to comply with British Standard BS5385. It consists of three components: a primer, a water-proofing membrane and reinforcing tape.
The regulations require all wet rooms and shower installations to be fully sealed prior to tiling and the weber.sys protec features an innovative rubber jointing mesh allowing movement in the substrate joint without the tape rupturing or deforming. The Weber tape expands with heat returning exactly to its original size as the wall cools without risking water penetration or damage to the tile/substrate bond.
weber.sys protec is simple to use. An application of the primer is brushed onto the jointed panels. The Weber jointing tape is cut to length allowing adequate overlaps. The water-proofing membrane is brushed onto the corners and the tape is pushed into position over the joint. When all joints are taped and another coat of the fix solution applied, the whole surface area of the wet room or shower is coated and protected and ready for tile adhesive and tiles to be installed in the normal manner in one or two hours.
01525 722169
Enquiry no: 104
- Ours Sanitary Ware Aquires Middlewich
- New UK Designed and Manufactured Linear Drain...
- Style, innovation and quality from Matki Show...
- MX Group – A growing influence in the bathroo...
- Replacement shower solutions from Triton
- Dural UK Ltd, Linear Shower Drainage Systems
- New generation extraction from Westin Design
- AN IDEAL WORLD
- The Hoover All in One
- PASA XP from KERMI
